Assa Abloy CL33700 TCPWI1 User Manual download pdf (Page 32)

Copyright© 2009, 2014 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.

1.1 Access 700 PWI1 CL33700 Cylindrical

Locksets

Intelligent WiFi Access Control Cylindrical Locks

A. WiFi Access Control Cylindrical Locks to be CL33700 Series as manufactured by Corbin Russwin

of Berlin, CT.

B. BHMA certiﬁed extra heavy duty, lever type cylindrical lock conforming to ANSI 156.2 Series

4000, Grade 1 standard and ANSI A117.1 accessibility guidelines. Motorized locking control of

lever handle trim (solenoids not acceptable) with 1/2" anti-friction deadlocking latch, UL listed

and labeled for up to 3 hour ﬁre rated openings.

1. Backset: 2-3/4 inches

C. WiFi access control locking devices interface using ﬁeld replaceable IEEE 802.11 b/g/n, 2.4

GHz wireless radio connection to an Ethernet Local Area Network (LAN) facilitating centralized

control via a Software Development Kit (SDK). Locks will continue to operate independent of

Ethernet (LAN) wireless connection slowdown or failure.

1. Provide access control products with non-volatile memory.

D. Supports WEP, WPA, WPA2 and 802.1x wireless encryption (IEEE 802.11 b/g/n, 2.4 GHz). AES

128 encrypted communication between IP Enabled lock and electronic access control system

platform via SDK. Programmable time zone periods, blocked holidays, automatic unlock with

or without ﬁrst entry, minimum of 2,400 user codes and the ability to audit the last 10,000

transactions (event type, date, time, user ID and name). Distributed intelligence allows stand

alone functional operation of lock in absence of network communication or slowdown allowing

for system operational redundancy.

E. Integrated reader supports High Coercivity (HiCo) magnetic swipe credentials, HID

125 kHz

proximity credentials or ISO 14443 A/B and ISO 15693 13.56 MHz contactless credentials:

HID

iCLASS / iCLASS SE (full authentication, all formats), MIFARE Classic and DESFire EV1 (full

authentication, all formats); NFC (Near Field Communications) and HID® SIO-Enabled™.

1. Valid/ Invalid credential presentation viewable by means of LED indicators on outside

escutcheon.

2. Dual factor keypad authentication function optional.

F. Environmental Conditions: Conformally coated weather resistant electronic controller shall meet

the following minimum requirements:

1. Operating temperature: -13°F (-25°C) to 151°F (66°C)

2. Operating humidity: < 85% non-condensing

3. Weatherized design suitable to withstand harsh environments with a certiﬁed rating of IP55

G. Conﬁguration: Programming of time zone periods, blocked holidays, automatic unlock with or

without ﬁrst entry, and listing 10,000 event transaction history consisting of event type, date,

time, user ID and name is required.

1. Provide network and lock conﬁguration CD tool kit for initial lock set-up and programming

via USB connection.

H. Monitoring: Software accessible monitoring (via SDK) of inside lever handle (Request-to-Exit),

door position switch (DPS) integral to the lock (door open/closed status), forced door, unknown

card, door held open, battery and tamper.

1. Standard privacy function initiated from push button on inside escutcheon and cancelled

upon activation of valid Request-To-Exit (REX) or user deﬁned credentials.

a. Activation of privacy function is indicated by LED notiﬁcation on inside escutcheon.

b. Redundant actuation of privacy button does not deactivate privacy mode.

I. Emergency override access capability by mechanical key cylinder retraction of lock latch bolt

without electronic activation necessary.

J. Inside lever retracts latch bolt.

K. Power Source: Powered by 6 AA alkaline batteries with LED indication of locked, programming

mode and low capacity warning status conditions.

1. Optional hard power by means of 12-24 VDC power supply.

L. Cylinders: Reference 2.04 Keying for keying requirements

2.1 Access 700 PWI1 ML20700 Mortise Locksets

Intelligent WiFi Access Control Mortise Locks

A. WiFi Access Control Mortise Locks to be ML20700 as manufactured by Corbin Russwin of

Berlin, CT.

B. BHMA certiﬁed extra heavy duty, lever type mortise lock conforming to ANSI 156.13 Series

1000, Grade 1 standard and ANSI A117.1 accessibility guidelines. Electronic motorized locking

control of lever handle trim (solenoids not acceptable) with 3/4" anti-friction deadlocking latch

and 1" case-hardened steel deadbolt. UL listed and labeled for up to 3 hour ﬁre rated openings.